B mesh belt conveyor line which quality? After-sales service more assured

Is that clunking conveyor line in your shop jamming again? Changing a mesh belt is more difficult than finding a partner? Don't worry, let's talk about it today--In the end, which b mesh belt quality to carry manufacturing, after-sales service is not to play the missingAs an old man who has been in the workshop for ten years! As a ten-year old greaseball in the workshop, I dare to beat my chest and say: choose the right manufacturer, you this production line can be less than ten years of tossing!

I. Ningjin, Shandong: the “Silicon Valley” of the mesh belt industry”

​Seventy percent of the country's B mesh belt popped out of this pimple! Ningjin County alone is stacked with Xin Gang Machinery, Weida Machinery, Zhisheng net chain of these old. Why are they so good? To cite a chestnut: you into a factory, punch presses, laser cutting machines, CNC equipment all work, the plant is big enough to play soccer--They can even control the pitch of the webbing to the millimeter.The precision is not scary, you say? More absolute is the industry chain supporting, from the chain, sprocket to the turning machine, next door workshop can handle accessories, save you run around. Local people laughingly said: “In Ningjin, a fall, can be pressed with three stainless steel wire!”

Second, the core of a good mesh belt three passes: material, structure, after-sales service

1. ​Don't mess with the material.::
   Directly see the test report! 304 stainless steel is the basic model, 600 ℃ high temperature resistance (bread baking line enough); 316L upgraded version of hydrochloric acid corrosion resistance, aquatic processing plant favorite; if 900 ℃ annealing furnace, directly on the 310S special steel. Some factories use 201 stainless steel as a second best ---Three months of rust to wear, and it's too late to cry.The first step is to make sure that you have a good idea of what you want to do. White avoid pit trick: take the magnet suck! 304/316L basic suck can not, can suck firmly iron must be cheap.

2. ​Structural Play::

   ​typology​	​avoid manufacturing scenarios​	​unique skill​
   Single-layer B-mesh belt	Bread cooling, fruit and vegetable drying	Breathability 70%, fast heat dissipation without stuffy material
   Double-layer reinforced mesh belt	Brick conveying, mine sorting	Load capacity 50kg, with lateral support chain bar
   Anti-static coated mesh belt	Transportation of lithium battery poles	Surface resistance 10⁶-10⁹Ω, anti-sparking
   I've seen the master with pliers to break the chain of Zhisheng fierceReinforced Mesh Belt-Z type nodes do not move, ordinary mesh belt has long fallen apart!

3. ​After-sales service is not a blank check::

   • ​48 hours of human presence: Manager Song of Xingwang Conveyor puts words in his mouth, “If there is any problem with the mesh belt, people will be in place in 48 hours!” Also comes with a maintenance kit - food-grade grease + special steel wire brush, hand to teach you to clear grease and dirt every month.
   • ​​modular design​: Dinli webbing trick: which section of the bad demolition of which section, half an hour for a new one, save the whole replacement of the wrong money.
   • ​life-long record system: Jiangsu Hengli to each batch of webbing construction “ID card”, scanning code to check the material, process records, out of the problem traceability fast and accurate.

Third, what makes these plants named by the old driver?

• ​Shandong Zhisheng Mesh Chain: Specialized in all kinds of disorders! Glass factory annealing furnace 900 ℃? His family 310S mesh belt hard to carry two years do not change, the cost straight down 60%.
• ​Jiangsu Hengli Hydraulic: Play the “fine work” of the electronics factory. Antistatic mesh belt transport circuit board, yield rate soared to 99.3%, Huawei supply chain are recognized it.
• ​Ningjin Weida Machinery: Food factory pro-mom level service. 304 mesh belt with Teflon coating, zero sticking of dough, also sendsFree monthly inspectionsThe

Fourth, the novice mine guide: do not be fooled by the low price limp!

• ​price chicaneryThe same 304 mesh belt, a treasure to sell 50 yuan / meter, Vinda sold 95 yuan / meter - where is the difference?Cheapo nickel is less than 8%It's brittle in three months.
• ​a booby-trap: Keep an eye on these two before signing the order:
  1. Warranty written clearly“Includes labor + accessories”Don't be fooled by “materials only”;
  2. The default clause states “$500 per hour of downtime.”.
• ​lit. test the machine and discover the mystery (idiom); fig. to play with the machine and learn from it: Let the manufacturer bring samples to the scene to run materials! Throw a piece of oiled dough to see if it is sticky, splash some salt water to see if it is rusty - a hundred times more useful than sales bragging.

Fifth, personal opinion: mesh belt is the waist of the assembly line, the waist is good in order to stand to make money

Having run over thirty factories across the country, there is one lesson in blood and tears.Cheap is like buying a time bombI know a boss to save money to buy poor quality mesh belt! Know a boss to save money to buy a poor quality mesh belt, the results of the production line downtime one day loss of 50,000, enough to buy ten high-quality mesh belt.
​Don't just video factory inspection - kill to go to the workshop to see the real situation! Equipment grease encrusted? Scrap material piled up? No calluses on the hands of the master? Remove before it is too late! Those ten years did not change the mesh belt factory, the secret is three words.choose the right personThe

(Note: The data and cases quoted throughout the text are from search results and are not fictitious)