Low-cost small roller line: show distance conveyor customization strategy

Hey, that's all you have for a trade show budget and you want a professional assembly line? 🤔 Don't panic! Today, we will teach you how to use5,000 for a professional-grade conveyor lineThe exhibits are guaranteed to be smoother than Dove, and the exhibitor next door is looking at them with eyes!

🔍 I. Why does the show have to choose low-cost roller lines?

Think about it, the booth fee is thousands of dollars a day, the material and freight costs are burning money, and then spend tens of thousands of dollars to buy equipment? Meat pain! Smallplaten lineWhere's the cow?

• ​space-saving: Aluminum racks are light enough for two people to lift and don't take up much space when tucked into a corner.
• ​labor-savingModular assembly, the girls can do it in 10 minutes.
• ​save shipping costs: Unpacking the trunk of a stuffed sedan, logistics fees go straight to zero
  Last year's Yiwu Commodity Fair Wang, with second-hand equipment put together an 8-meter line only cost 3,800 yuan -Doesn't it smell good to save money and rent more prime booths?​

⚖️ IIRC, power or no power? Don't be led into a pit by sales!

​Soul torture: are you transporting a cell phone or an anvil?​
Look at this table for seconds to understand the options:

👉experience based on one's own blood and tearsShanghai Electronics Fair: Sister Li used an unpowered line to transport the circuit board boxes, and her arms were so shaky that she couldn't hold the scanning gun when she was pulling out of the show...Anything over 15kg, bite the bullet and go electric!​

🧱 Third, material saving metaphysics! Don't pay the IQ tax.

Sales blowing stainless steel high?The show was only 3 days long, and rust prevention wasn't even just a necessity!​

• ​Galvanized steel rollers: 150 ℃ baking paint rust enough, the price is only stainless steel 1 / 3
• ​Engineering Plastic Bracket60% is lighter than metal and can still carry 50kg.
• ​Used Aluminum Profiles: Idle fish for dismantled parts at broken bones.

⚠️Rollover warning: Don't save at food shows! Last year old Zhang used ordinary steel to transport chocolate, samples stained with rusty flavor all ruined...Food contact must be 304 stainless steel!​

📏 Fourth, the golden formula for size: 1cm more wasted 100 dollars

​Remember the two divine numbers::

1. ​Roller length = Exhibit width + 5cm(Refer to web page 1)
2. ​Roller spacing ≤ 1/3 of the length of exhibits(30cm box spacing ≤ 10cm)

Take a chestnut 🌰:

Toy factory shipping box (25x15cm), customized 30cm long roller + 8cm spacing -Cost Direct 40%, saving 20 rods over a standard 50cm roller!

⚙️ V. Drivetrain Gouging Tips

​Chain/O-belt/cog? Low cost preferred O-belts!​

• ​chain drive: Powerful but rattling, booth turns into a repair store
• ​O-Band:: 👑The king of value for money!If it breaks, pull it out and replace it, repair it without yelling at your dad.
• ​gear driveAccurate but expensive, unless you're transporting precision instruments.

💡Exclusive data: O-belts cost 65% less than chain and are 20 dB quieter -Exhibitors don't have to yell to talk!​

🧩 Six, space draining technique: 1 square meter to play with flowers

​Booth smaller than a bathroom? Copy these three tricks::

1. ​”Gluttony” position.::
   S-shaped route with conical roller 📉, 2-meter depth to 6-meter conveyor distance
2. ​”Transformer” stand::
   Optional liftable foot cup (30cm adjustment range), uneven ground leveling in seconds.
3. ​”Lego-style” assembly::
   Quick release couplings+modular designWe'll use it again for next year's show.

🛡️ vii. Don't have a head iron for safety and security! You can't save money on these.

​Leave at least 800 of your 5,000 dollar budget for security.::

• ​armrests: $15/pc PVC cover to avoid spectators' hands being rolled up
• ​emergency stop switch: The slope section must be loaded! When you realize that the cargo is going to fall, immediately shoot to stop!
• ​Rubber-coated baffle: 3mm thick rubber strips on turns to prevent exhibits from ”jumping out of the car”.”

Last year's Guangzhou Building Materials Exhibition tragedy: an exhibitor to save the edge of the block, ceramic samples turned and flew out to smash the imported floor...Enough money was lost to buy ten lines!​

💎 The Old King Speaks His Mind (8 Years Dry)

Don't buy into the ”buy equipment, rent equipment” nonsense! A customized roller line is only 4,000 or 5,000:
✅One hour faster to vacate the show(Save 600+/hour in overtime charges)
✅0 damage to exhibits(Breakage rate reduced from 121 TP3T to 0.81 TP3T)
✅Professionalism(Customer signing rate up 30%)
Next time you set up a show, customize it according to this routine, so that the 00's planner next door will call it straight from the inside!

With industry secrets: find customized Shandong manufacturers (web page 1/4), cheaper than the first-line brands 50%, remember toThickened galvanized layer(Standard 8μm plus 15μm)